河北程跃泵业有限公司

泥浆泵的作用不可小觑，无法用言语形容，只要亲身体验了才晓得它的能力。泥浆泵有很多作用，不同的活计需求不同型号的机型，起到它应起的作用，发挥它的用处，其中，单作用式的泥浆泵是在活塞往复运动的一个循环中仅完成一次吸排水动作 ，而双作用是泥浆泵则是完成两次吸排水动作。泥浆泵还有单缸﹑双缸、三缸、五缸等种型式。泥浆泵能不能充沛发挥它的作用完整在于您合理的选择和应用。运用得当它完整能够成为你工作中的好同伴或者是得力助手，为您顺利完成工作，获得成果助一臂之力。

泥浆泵谁用谁晓得，谁用谁受益。

1、泥浆泵启动前，吸水管、底阀及泵体内应注满引水，压力表缓冲器上端应注满油。别的留意旋转方向，如与规则相反可互换泥浆泵三相电机中恣意两相，即可改动过来。

2、起动时,不用加引水,密封填料不宜太紧,待起动后停止调整。

3、为了确保电机运转平安,泥浆泵电机外壳应加接地线。

4、在正常状况下，应在空载时停泵。停泵时间较长时，应全部开放水孔，并松开缸盖，提起底阀放水杆，放尽泵体及管道中的全部泥砂 .

The function of mud pump can not be underestimated, can not be described in words, as long as you experience it personally, you will know its ability. Mud pump has many functions. Different types of models are required for different activities, which play its role and play its role. Among them, single acting mud pump only completes one suction and drainage action in a cycle of reciprocating piston movement, while double acting mud pump completes two suction and drainage actions. There are single cylinder, double cylinder, three cylinder and five cylinder types of mud pump. Whether the mud pump can fully play its role depends on your reasonable choice and application. Using it properly and completely can be a good companion or right-hand assistant in your work, which can help you to finish your work smoothly and get results.

The mud pump who uses who knows, who uses who benefits.

1. Before starting the mud pump, the suction pipe, bottom valve and pump body shall be filled with water, and the upper end of the pressure gauge buffer shall be filled with oil. Other pay attention to the direction of rotation, such as the opposite of the rules of interchangeable mud pump three-phase motor arbitrary two-phase, you can change over.

2. When starting, do not add water, the sealing packing should not be too tight, and stop adjustment after starting.

3. In order to ensure the safe operation of the motor, the mud pump motor shell shall be equipped with grounding wire.

4. Under normal conditions, the pump shall be stopped at no load. When the pump stop for a long time, all water holes shall be opened, the cylinder head shall be loosened, the bottom valve drain rod shall be lifted, and all mud and sand in the pump body and pipeline shall be drained