Mud pump liner, top sleeve, cylinder head, pull rod
Piston, piston pressing plate, leather bowl, piston seat, piston rod, plunger rod, water inlet and drainage valve, water inlet and drainage valve seat, crosshead, crosshead sliding sleeve, crosshead pin shaft, crankshaft, connecting rod, connecting rod upper and lower tiles, connecting rod copper sleeve, connecting rod screw and nut, crown nut, framework oil seal, O-ring, bearing, matching gear and shaft are prone to quality problems. They are purchased and used We should pay attention to
1. High concentration and high viscosity < 10000pas and suspension slurry containing particles can be guaranteed.
2. Ensure that the liquid flow is stable without overflow, pulsation, mixing and shearing.
3. The discharge pressure has nothing to do with the rotating speed, and the low flow rate can also adhere to the high discharge pressure.
4. The flow is directly proportional to the speed, and the flow can be adjusted by the speed changing mechanism or the speed regulating motor.
5. Self suction can be strong, and liquid can be directly pumped without bottom valve.
6. The pump can be reversed, and the flow direction of the liquid is changed by the rotation direction of the pump, which is applicable to the place where the pipeline needs to be flushed in the reverse direction.
7. Stable operation, low vibration and noise.
8. Simple structure, easy disassembly and maintenance.
I-1b concentrated pulp pump is widely used in chemical, pharmaceutical, brewing, paper, food and other units.