欢迎访问本网站,我们是专业的污水泥浆泵生产商
联系方式
  • 电话:0312-3426976
  • 联系人:徐经理
  • 手机:13932271419
  • 业务QQ:632469545
  • 地址:河北安国市石佛镇路景工业园区景旺路8号

百度百科早知道,泥浆泵开机前注意事项

date.png 2019-11-07 10:00:56

泥浆泵开机前,请检查进水管、出水管能否有梗塞,向前后轴承能否加注黄油,检查盘根能否充溢。泥浆泵工作时应装备高压清水泵,将大于泥浆泵压力的清水输向防漏填料,对填料停止防护,泥浆泵工作时不得关闭冲洗泵,否则,将使密封局部疾速磨损。叶轮与护板之间的间隙能否合理,对泥浆泵寿命影响很大。间隙不合理,则泵运转时产生振动与噪音,过流部件很快损坏,因而改换叶轮时,应留意使间隙满足图纸请求,间隙调整,泥浆泵可经过后轴承体上的调整螺钉来停止。泥浆泵的允许吸程是在保送清水时测定的,在抽吸泥浆时应思索泥浆对吸上才能的影响。

Before starting the mud pump, please check whether the water inlet pipe and water outlet pipe are blocked, whether the front and rear bearings can be filled with grease, and whether the packing can be filled. The mud pump shall be equipped with a high-pressure clean water pump to transfer the clean water greater than the pressure of the mud pump to the leakproof packing. The packing shall not be protected. When the mud pump is working, the flushing pump shall not be shut down, otherwise, the sealing part will be quickly worn. Whether the clearance between impeller and guard board is reasonable or not has a great influence on the service life of mud pump. If the clearance is unreasonable, the pump will produce vibration and noise during operation, and the overflow parts will be damaged quickly. Therefore, when changing the impeller, pay attention to make the clearance meet the requirements of the drawing. The clearance adjustment can be stopped by the adjustment screw on the rear bearing body. The allowable suction head of mud pump is measured when delivering clear water. When pumping mud, the influence of mud on suction ability should be considered.


联系方式

ico04
联系人

徐经理

ico01
电话

0312-3426976

ico06
手机

13932271419

ico05
QQ

632469545

ico03
邮箱

632469545@qq.com

ico02
地址

河北安国市石佛镇路景工业园区景旺路8号

 
<
线

商盟客服 >
您好,欢迎莅临我们的网站,欢迎咨询...

  • 徐经理: 点击这里给我发消息